Weathershield is a specialist range of paint for exterior masonry, wood and metal that uses advanced technology to help withstand the elements, so your paint will look better for longer.
Weathershield Ultimate Protection is a superior offering to Weathershield All Weather Protection, thanks to its Alkali Guard technology: Seals, Primes & Strengthens.
The key benefits of these products are:
*Super flexible 360o Protection from the weather and from the changes on the wall. The benefit is that it will look good for longer without cracking.
*Primer & Topcoat 2in1. The benefits are a better adhesion for longer lasting finish (no peeling), a quicker application and peace of mind!
*Seals the surface to protect against alkali sault attacks comings through the paint film.
The Weathershield Promise is available on all qualifying tins of Weathershield Masonry paint once you’ve registered your product with our easy-to-use portal.
If our Weathershield Smooth Masonry and/or Textured Masonry paint should peel or flake, or if there’s mould growth within the paint film for as long as you live in your home, we promise to return the value of a replacement product to you*.
Registration and paint application is required within six months of purchase. *See here for full T&Cs and exclusions.
For best results, always thoroughly prepare your surfaces before you start to paint. Our Polycell Multi Purpose Exterior Polyfilla range has a wide selection of products to fill in cracks or gaps of any size, which, once dry, can be painted over with a Weathershield product of your choice.
Weathershield is specially designed to protect the exterior of your home from outdoor weather conditions. For your interior, see our extensive interior range here. Our indoor paint is available in a wider range of colours, too.
Our Weathershield range isn’t available in matt or eggshell. Weathershield Masonry is available in Smooth or Textured finish, and our exterior paint comes in gloss, high gloss and satin finish.
Our Smooth and Textured Masonry paint is perfect for covering bricks* and also masonry, render, concrete, pebble-dash. But it’s important to prepare the surface before application. Use a stiff brush to remove any loose material, and fill in any cracks with our Polycell Polyfilla range. External brick walls may need treating with a fungicidal wash, and if the surface is porous or powdery, apply a coat of Dulux Weathershield Stabilising Primer.
*not suitable for use on fletton bricks
Yes, Weathershield products are micro-porous and breathable, allowing moisture and air to be released. However, they aren’t suitable for lime render (please see below).
We wouldn’t recommend it. Lime render needs paint that allows a completely free passage of water vapour and has low tension as it dries. Lime render is quite friable, and needs specific paint, such as a mineral silicate one. Try specialist company Keim, which has a range of mineral paints for use inside and out.
The drying time is similar to the recoat time. It's 4hours for both Weatheshield All Weather Protection & Ultimate Protection.
Both Weatheshield All Weather Protection & Ultimate Protection are water-based products.
Dulux Weathershield is available to buy at Dulux stockists nationwide and online on Dulux.co.uk. To find your nearest Dulux stockist, click here.
This will depend on the product. Weathershield Smooth Masonry paint is available in 19 shades, whereas Weathershield Textured Masonry paint comes in 6 shades. For a full list of Weathershield products and the colours they are available in, visit dulux.co.uk.
We only have a Medium Base available for colour mixing and you’d need an Extra Deep Base for deeper colours, which is not available for Weathershield Masonry Paint.
Again, this will vary depending on which Weathershield product you use. Weathershield All Weather Smooth Masonry paint typically provides coverage of 15m2/L, compared to 9m2/L coverage for Weathershield All Weather Textured Masonry paint. Weathershield Ultimate Protection Smooth Masonry paint provides coverage of 12m2/L. The coverage is different for other products in the Weathershield range.
For help with working out the amount of Weathershield paint you’ll need, read our article on calculating paint.
We recommend using our 3 step system for ultimate protection when using exterior Gloss and Satin products. This consists of primer, undercoat and topcoat. To read more about this, click here.