Dulux Weathershield One Coat Exterior Gloss
Weathershield One Coat Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection.
Weathershield One Coat Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection for exterior wood and metal. Apply just one coat to cleaned, primed surfaces in good condition. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 coat of Weathershield One Coat Exterior Gloss. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Flame, Health hazard, Exclamation mark - Flammable liquid and vapour. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. - Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%) - Contains - 2-butanone oxime and IPBC. - May produce an allergic reaction. - Repeated exposure may cause skin dryness or cracking.
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP) wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
Store paint in dry conditions and protect from extreme temperatures. TIP: after use firmly secure the lid. To preserve the quality, briefly turn the can upside down and return to upright position to
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again