Dulux Paint Mixing Weathershield Quick Dry Exterior Satin
For the perfect weatherproof satin finish on your exterior wood & metal
Weathershield Quick Dry Exterior Satin from Dulux is a water-based product, provides an attractive mid-sheen finish and guarantees 10 year weather protection provided surfaces are in good condition before application.
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 or 2 coats of Weathershield Exterior Satin. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10 degree Celsius and when bad weather is not forecast.
Harmful to aquatic life with long lasting effects. - 0 - 0 - Contains - 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3:1). - May produce an allergic reaction.
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP) wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
Remove paint from the brush with a cloth and then wash with water
Store paint in dry conditions and protect from extreme temperatures.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again