Dulux Paint Mixing Satinwood
A hardwearing and subtle sheen paint for interior wood and metal (excluding heated surfaces).
Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish. Ideal for adding a modern effect to your home.
Stir thoroughly before use to ensure the paint is completely mixed. Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush. Allow 6 hours between coats, longer when cold and damp. Where a strong colour change is involved, more coats may be required. Newly painted doors should not be closed (tightly) until paint is fully dry.
Contains - 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3:1). - May produce an allergic reaction.
Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry. Treat any knots in wood with a suitable knotting solution. Apply an appropriate Dulux primer to bare surfaces. Surface defects should be repaired using the appropriate Polycell products.
After use, remove as much paint as possible from brushes before cleaning with water. Store paint in dry conditions and protect from frost
Store paint in dry conditions and protect from extreme temperatures.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again