For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Flat Matt
Coverage
Up to 13m2 / litre
Drying Time
2-4 hours
Coats
2
Product Features
Light & space enhancing
Lumitec
Product Description
Dulux Light + Space Matt makes any room feel brighter and more spacious. Its patented LumiTec formulation works with light-reflective particles to reflect up to twice as much light back into your room, when compared to our conventional emulsion paints.
Application Description
Apply 2 coats with a brush or roller, leave 2-4 hours between coats. Do not apply in very damp or humid conditions or extreme temperatures. TIP: if the colour change is strong, more coats may be required. If you use more than one can, mix them together in a large container or finish in a corner before starting a new can.
Health & Safety
Contains - C(M)IT/MIT(3:1). - May produce an allergic reaction
Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry.. If new, bare and absorbent surface, seal with this product, thinned 10% with water, or if very porous, use Dulux Sealer for Plaster. If the wall is damaged, repair using the appropriate Polycell product.
2.
Cleaning
Cleaning up after painting: Remove as much paint as possible from brushes and rollers before cleaning with water.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.