For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Gloss
Coverage
Up to 12m2/litre
Drying Time
Leave for 16 hours to dry. Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry.
Coats
2
Product Features
Non drip
No undercoat required
High gloss finish
Hardwearing
Product Description
Dulux Non Drip Gloss is a beautiful gloss paint that provides long-lasting protection and is easy to use thanks to its Non Drip formulation. It is self-undercoating, hardwearing, wipeable and suitable for use on interior wood and metal, including radiators.
Application Description
Apply 1 or 2 coats with a brush, leave at least 16 hours between coats. TIP: if the colour change is strong, more coats may be required.
Whilst leading edge technology has been used in the development of this product, the nature of solvent based paints means that they will discolour over time. The rate of discolouration is faster in areas with low natural or UV light. For long lasting whiteness we recommend the use of a water based formulation , available in the Dulux Quick Dry range
Health & Safety
Flame, Exclamation mark Flammable liquid and vapour. May cause drowsiness or dizziness.
Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics.
Make sure the surface is clean (no dirt or grease) and dry. If a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with a suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product. When painting radiators, make sure that they are cold.
2.
Cleaning
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.