Weathershield One Coat Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection.
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Gloss
Coverage
Up to 12m2/litre
Drying Time
Leave 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
Coats
1
Product Features
One coat
High gloss finish
Guarantee 6 years
Flexible paint film
Product Description
Weathershield One Coat Gloss from Dulux gives a beautiful high gloss finish and guarantees 6 year weather protection for exterior wood and metal. Apply just one coat to cleaned, primed surfaces in good condition. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Application Description
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 coat of Weathershield One Coat Exterior Gloss. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Health & Safety
Flame, Health hazard, Exclamation mark - Flammable liquid and vapour. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. - Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%).
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP) wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
2.
After use
Cleaning After Final Use- Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps- 1. Remove Excess Paint- Scrape off leftover paint into a container for reuse. 2. Use Brush Cleaner- Use Polycell Brush Cleaner to clean brushes and rollers. 3. Reuse Brush Cleaner- Allow the paint solids to settle and reuse the cleaner by pouring the clear liquid into another container. 4. Dry Naturally- Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly- Dispose of the remaining solids and used brush cleaner at a hazardous waste facility. Do not pour any solvent-based paint, brush cleaner or washings down the drain or onto the ground. Do not flush paint down the drain, including when cleaning painting tools
3.
Storing
Storing & Responsible Disposal
Do not use or store paint in extreme temperatures and protect from frost.
Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces.
Dispose Responsibly- Never pour paint or waste washings down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs.
Reuse Roller Cages- Remove sleeves and store cages in a dry, dust-free place.
If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues.
Paint Washings- Collect used brush cleaner in a container; don't pour it into drains or on the ground. Let solids settle, pour off clear liquid into another container for reuse or disposal. Dispose of remaining solids and used cleaner at a hazardous waste facility.
Do not flush paint down drains, including when cleaning tools.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
