- Uv resistant.
- Rainproof.
- Quick drying.
Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!
Dulux Weathershield Multisurface Quick Dry Satin
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Satin
-
Coverage 10 m2/L
-
Drying Time Touch dry in 1 hour. Leave 4 hours to fully dry. Newly painted doors and windows should not be closed until paint is fully hardened.
-
Coats 2
-
Guarantee 6 years.
-
Quick drying.
-
Multi-surface.
Product Description
Weathershield Multi Surface Quick Dry Satin from Dulux is a water-based finish that can be used on exterior wood, metal and uPVC and guarantees 6 year weather protection. The weatherproof paint film is mould resistant to minimise staining and flexible to prevent cracking. This keeps your paintwork looking better for longer compared to conventional Dulux paints.
Application Description
Before using this product ensure all surfaces to be painted are clean (no dirt, grease, rust or flaking paint) and dry. Areas affected by mould, algae or fungi should be treated with an appropriate fungicidal wash.
Sand down the surface to remove any sheen. Refer to health and safety information.
Metal
Remove rust using Hammerite Rust Remover. On new galvanized surfaces, allow to weather for six months before application.
New bare wood
To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Surface defects should be repaired using the appropriate Polycell product.
uPVC
Apply direct to clean substrate. TIP: Apply Dulux Weathershield Multisurface only in dry conditions, above 10°C and when bad weather is not forecast. The use of light colours only, particularly on south facing elevations is recommended to avoid solar heat again damaging the Upvc.
Sand down the surface to remove any sheen. Refer to health and safety information.
Metal
Remove rust using Hammerite Rust Remover. On new galvanized surfaces, allow to weather for six months before application.
New bare wood
To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Surface defects should be repaired using the appropriate Polycell product.
uPVC
Apply direct to clean substrate. TIP: Apply Dulux Weathershield Multisurface only in dry conditions, above 10°C and when bad weather is not forecast. The use of light colours only, particularly on south facing elevations is recommended to avoid solar heat again damaging the Upvc.
Health & Safety
Contains - 1,2-benzisothiazol-3(2H)-one and IPBC. - May produce an allergic reaction.
Tips & Advice
-
1. CleaningRemove paint from the brush with a cloth and then wash with water.
-
2. StoringStore paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Pure Brilliant White
Save to My Workspace
Save product
Dulux Weathershield Multisurface Quick Dry Satin