For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Satin
Coverage
Up to 13.5m2/litre
Drying Time
Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
Coats
2
Product Features
Rainproof
Quick drying
Product Description
Weathershield Quick Dry Exterior Satin from Dulux is a water-based product, provides an attractive mid-sheen finish and guarantees 10 year weather protection provided surfaces are in good condition before application.
Application Description
Apply 2 coats of Weathershield Quick Dry Undercoat to primed surfaces with a brush. Finish with 1 or 2 coats of Weathershield Exterior Satin. Some dark colours may need a further coat. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10 degree Celsius and when bad weather is not forecast.
Health & Safety
Harmful to aquatic life with long lasting effects. - 0 - 0 - Contains - 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3:1). - May produce an allergic reaction.
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ (BP) wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
2.
Cleaning
Remove paint from the brush with a cloth and then wash with water
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.