Drying Time
Leave for 16 hours to dry. TIP: Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry.
Coats
1
Product Features
One coat
No undercoat required
Product Description
Dulux Once Satinwood has been specially formulated to give a perfect satin finish on interior primed or painted wood or metal surfaces in just one coat. It does not require an undercoat.
Application Description
Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.
Health & Safety
Flame - Flammable liquid and vapour. - 0 - 0 - Contains - 2-butanone oxime. - May produce an allergic reaction.
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry.
2.
Cleaning
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
