Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
You should receive an email with instructions to reset your password shortly.
We will use this to provide you with useful information
Latest Covid-19 Ordering, Delivery & Service status updates here.
No Colour Selected
Dulux Once Gloss
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
Key information
Finish
Gloss
Coverage
Up to 12m2/litre
Drying Time
Leave for 16 hours to dry. Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry.
Coats
1
Product Features
One coat
High gloss finish
Product Description
Dulux Once Gloss is a one coat gloss paint for interior wood and metal surfaces.
Application Description
Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.
Whilst leading edge technology has been used in the development of this product, the nature of solvent based paints means that they will discolour over time. The rate of discolouration is faster in areas with low natural or UV light. For long lasting whiteness we recommend the use of a water based formulation , available in the Dulux Quick Dry range
Health & Safety
Flame, Health hazard, Exclamation mark - Flammable liquid and vapour.
May cause drowsiness or dizziness.
May cause damage to organs through prolonged or repeated exposure. - Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics
Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%) - Contains - 2-butanone oxime. - May produce an allergic reaction. - Repeated exposure may cause skin dryness or cracking.
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry.
2.
Cleaning
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
