Good to see you!
Or by email
Welcome to Dulux
Or by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
We will use this to provide you with useful information
Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Once Eggshell
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Eggshell
-
Coverage Up to 30m2 / litre
-
Drying Time Leave for 16 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
-
Coats 1
-
One coat
-
No undercoat required
Product Description
Dulux Once Eggshell has been specially formulated to give a perfect low sheen finish on interior and primed or painted wood or metal surfaces in just one coat. It does not require an undercoat. Dulux Once is also available in Emulsion, Gloss and Satinwood.
Application Description
Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.
Health & Safety
Flame, Exclamation mark. Flammable liquid and vapour. Contains butanone oxime. May produce an allergic reaction.
- DU_GB_EN_ONCE_EGGSHELL.pdf
Tips & Advice
-
1. Preparing the SurfacesScrape: remove flaking or defective paint and sand down the surface to remove any sheen. Clean- make sure the surface is clean (no dirt or grease) and dry. Seal: if a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product.
-
2. CleaningFor best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
-
3. StoringStore paint in dry conditions and protect from extreme tempretures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.