Our products

Dulux Tile Paint

Dulux Tile Paint is 10 times tougher and 10 times more shower resistant than our conventional water based satin paints which means that it won't peel off in areas continually soaked with water. It is self-undercoating and quick drying.

Finishes: Satin

Select a colour for this productHow to use

Colours

Dulux Tile Paint is available in the following colours:

Usage

Prepare

Coverage: Up to 18m²/litre

Scrape

Remove any flaking or defective material. Using abrasive paper, thoroughly sand to scuff the tile surface. Refer to health, safety and environmental information.

Clean

Make sure the surface is clean (free from dirt, mould, grease and grout residue) and dry.

Seal

Paint

Drying time: 4 hours

Stir

Stir to ensure paint is completely mixed. Do not thin.

Apply

Apply 1 or 2 coats with a brush. Apply liberally and evenly to avoid runs and sags. Leave 4 hours between coats. Do not apply in very damp or humid conditions and when room temperatures are below 10°C. Not suitable for use on radiators or other heated surfaces. TIP: if the colour change is strong, more coats may be required.

Dry

Leave 4 hours to dry, and a minimum of 24 hours before exposing to water.

Clean

How: Water-based

Clean

Remove paint from the brush with a cloth and then wash with water.

Clean

Store paint in dry conditions and protect from extreme temperatures.

Seal

Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk

Total:
Checkout