Dulux Weathershield Multisurface
Coverage 10 m2/L
Drying Time Touch dry in 1 hour. Leave 4 hours to fully dry. Newly painted doors and windows should not be closed until paint is fully hardened.
Weathershield Multi Surface Quick Dry Satin from Dulux is a water-based finish that can be used on exterior wood, metal and uPVC and guarantees 6 year weather protection. The weatherproof paint film is mould resistant to minimise staining and flexible to prevent cracking. This keeps your paintwork looking better for longer compared to conventional Dulux paints.
Before using this product ensure all surfaces to be painted are clean (no dirt, grease, rust or flaking paint) and dry. Areas affected by mould, algae or fungi should be treated with an appropriate fungicidal wash.
Sand down the surface to remove any sheen. Refer to health and safety information.
Remove rust using Hammerite Rust Remover. On new galvanized surfaces, allow to weather for six months before application.
New bare wood
To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess. Surface defects should be repaired using the appropriate Polycell product.
Apply direct to clean substrate.
Health & safety
Contains - 1,2-benzisothiazol-3(2H)-one and IPBC. - May produce an allergic reaction.
- Guarantee 6 years
- Quick drying
Health and safetyHazard warnings
Remove paint from the brush with a cloth and then wash with water.
Store paint in dry conditions and protect from extreme temperatures.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again