Dulux Weathershield Exterior Stabilising Primer
A ready-to-use sealer
A ready-to-use sealer specially formulated for exterior masonry for use on powdery surfaces
Apply 1 coat of Weathershield Exterior Stabilising Primer with a brush or roller to seal any areas that remain powdery and dusty after the surface has been fully prepared. When fully dry, apply 2 coats of the selected Weathershield Masonry Paint.TIP: do not seal sound surfaces. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Flame, Health hazard - Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects. - Contains - Hydrocarbons,C10-C13,n-alkanes,isoalkanes,cyclics,less than 2%aromatics Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%) - Contains - 2-butanone oxime. - May produce an allergic reaction. - Repeated exposure may cause skin dryness or cracking.
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surfaces to be sealed are clean (no dirt or grease) and dry.
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
Store this product in dry conditions and protect from extreme temperatures
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again