Dulux Weathershield Exterior Satin
A quick drying, subtle sheen finish.
Weathershield Quick Dry Satin from Dulux provides an attractive mid-sheen finish and guarantees 10 year weather protection for exterior wood and metal provided surfaces are in good condition before application. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Apply 1 or 2 coats with a brush. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
Harmful to aquatic life with long lasting effects. -Contains - C(M)IT/MIT(3:1), 1,2-benzisothiazol-3(2H)-one and 2-octyl-2H-isothiazol-3-one. - May produce an allergic reaction.
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ BP wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
Remove as much of this product as possible from the brush with a cloth and then wash with water.
Store paint in dry conditions and protect from extreme temperatures.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again