Dulux Once Gloss
A one coat gloss for interior and exterior wood and metal.
Dulux Once Gloss is a one coat gloss paint for interior and exterior wood and metal surfaces.
Apply using a clean, good quality brush. Apply a thick even coat of paint taking care not to spread it too far. Failure to do so may require a second coat, particularly when painting over a darker colour with a lighter topcoat. Leave a minimum of 16 hours between coats.
Whilst leading edge technology has been used in the development of this product, the nature of solvent based paints means that they will discolour over time. The rate of discolouration is faster in areas with low natural or UV light. For long lasting whiteness we recommend the use of a water based formulation , available in the Dulux Quick Dry range
Flame, Health hazard, Exclamation mark - Flammable liquid and vapour. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. - Contains - Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, less than 2% aromatics Hydrocarbons,C9-C12,n-alkanes,isoalkanes,cyclic,aromatics(2-25%) - Contains - 2-butanone oxime. - May produce an allergic reaction. - Repeated exposure may cause skin dryness or cracking.
Remove flaking or defective paint and sand down the surface to remove any sheen. Refer to health, safety and environmental information. Make sure the surface is clean (no dirt or grease) and dry.
For best results, scrape off excess paint from the brush and clean with Polycell Brush Cleaner.
Store paint in dry conditions and protect from extreme temperatures.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again