Drying Time
Leave 6 hours to dry. Newly painted doors and windows should not be closed and radiators should not be heated until paint is fully dry.
Coats
2
Product Features
Lumitec
Quick drying
Light & space enhancing
Product Description
Dulux Light+Space Quick Dry Satinwood for wood and metal surfaces makes any room feel brighter and more spacious. Its patented LumiTec formulation works with light-reflective particles to reflect up to twice as much light* back into your room when used with Dulux Light+Space Matt. *compared to our conventional paints.
Application Description
Apply 2 coats with a brush, leave at least 6 hours between coats, longer when cold and damp. TIP: if the colour change is strong, more coats may be required.
Health & Safety
Contains - 1,2-benzisothiazol-3(2H)-one and C(M)IT/MIT(3:1). - May produce an allergic reaction.
Make sure the surface is clean (no dirt or grease) and dry.
If a bare surface, apply the appropriate Dulux Primer. Treat any knots in wood with a suitable knotting solution. If the surface is damaged, repair using the appropriate Polycell product. When painting radiators, make sure that they are cold.
2.
Cleaning
Remove paint from the brush with a cloth and then wash with water.
3.
Storing
Store paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
