Weathershield Smooth Masonry Paint

Weathershield Smooth Masonry paint is formulated with a unique high performance acrylic resin that provides guaranteed total protection against all types of extreme weather conditions for up to 15 years.

Surface preparation

To get the best results with Weathershield Smooth Masonry Paint, make sure that the surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry)
Remove any loose or flaking paint. Areas affected by mould, lichen, algae or moss should be treated with a suitable fungicidal wash.
Any surface defects should be filled with the appropriate Polycell Polyfilla product.
If the surface is still powdery after thorough preparation, seal it with a coat of Weathershield Stabilising Primer, but do not seal sound, new or bare surfaces.

How to use

Do not stir - This paint is ready to use.
Thinning is only necessary when sealing new or bare surfaces, in which case add up to 1 part water to 5 parts Weathershield Smooth Masonry paint.
2 full coats of Weathershield Smooth Masonry paint are normally required. However, on previously painted surfaces in good condition, where similar colours are used, 1 coat my be sufficient.
The coverage of Weathershield Smooth Masonry paint will vary according to the surface that is to be painted. An approximate guide is 13-15m²/litre on smooth surfaces such as rendering and 4-6m²/litre on rough surfaces e.g. pebble-dash. It is always a good idea to apply a small test area first.
Weathershield Smooth Masonry paint contains algicide and fungicide to inhibit mould and algal growth that can damage the paint film.
Precautions: Do not use on common or Fletton bricks. Do not use or store the paint in extremes of temperature. Do not use outside when there is a likelihood of rain, fog or frost both during and after application, as this will affect the drying process. Protect from frost.

Health and safety

WATER-BASED PAINT PRODUCT
THIS PRODUCT IS FOR EXTERIOR USE ONLY.
Ensure good ventilation during application and drying.
Avoid contact with skin and eyes, When painting it is advisable to wear eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove splashes from skin: use soap and water or a recognised skin cleaner.
This product contains a fungicide. Keep out of reach of children. Keep container tightly closed. Do not use or store by hanging on a hook. Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste paint.
Safety data sheet available for professional user on request.
Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. For further advice contact the Customer Care Centre at ICI Paints, Wexham Road, Slough, SL2 5DS. Tel 08444 817 817.

See the product overview for Weathershield Smooth Masonry Paint