Quick Dry Satinwood

A quick-drying water-based satin finish for interior wood and metal that is drip resistant and does not require an undercoat.

Surface preparation

Ensure surfaces to be painted are sound (i.e. not flaking and are sanded down), clean and dry. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
Before surface preparation, read the information in the Safety, Health and Environmental information section about old lead based paints.
For wood, treat any knots with knotting solution. Apply Dulux Wood Primer to bare surfaces.
Prime bare metal with Dulux Metal Primer.
Radiators must be turned off and only painted when cold.
Any surface defects should be filled with the appropriate Polycell Polyfilla product.

How to use

Stir thoroughly before use with a palette knife or similar implement.
Apply 1 or 2 coats of Dulux Quick Dry Satin as required, using a suitable clean brush. Where a strong colour change is involved, 2 coats will be required.
Touch dry in only 2 hours. Where a second coat is required, allow a minimum of 6 hours between coats. Newly painted doors and windows should not be closed (tightly) until the paint is fully dry.
Precautions:
Do not use outside when there is a likelihood of rain, fog or frost.

Health and safety

WATER-BASED PAINT PRODUCT
Ensure good ventilation during application and drying.
When applying paint it is advisable to wear suitable eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove splashes from skin using soap and water or a recognised skin cleaner.
Keep out of reach of children. Keep container tightly closed. Do not empty into drains or watercourses. Some local authorities have special facilities for disposing of waste paint.
Do not use or store in extremes of temperature and protect from frost.
This product contains no added lead. However, the wood and metal surfaces of the building, especially if it is pre-1960, may have been decorated in the past with a paint made with lead pigments. Preparation and removal of such paint can be hazardous. For a free leaflet explaining how the surface should be prepared safely, or for full Health and Safety information necessary for professional decorators to carry out a COSHH Assessment, contact: Dulux Advice Centre, ICI Paints, Wexham Road, Slough, SL2 5DS. Tel: 08444 817 817

See the product overview for Quick Dry Satinwood