Our products
Ecosense Matt
Dulux Ecosense Matt is a virtually odour free paint, making it more pleasant to use and allowing you to get back into your room quickly.
Usage guide
Surface preparation
Read the Health, Safety and Environmental Information section. Remove any loose or flaking material.
Ensure surfaces to be painted are clean, dry and free from dirt, grease and shiny surfaces. Seal new, bare absorbent surfaces with Dulux Ecosense Matt thinned 10% with clean water.
For best results, seal very porous surfaces with Dulux Sealer for Plaster. Surface defects should be repaired using the appropriate Polycell product.
Do not apply in very damp or humid conditions and when room temperatures are below 10°C.
How to use
Stir thoroughly before use to ensure the paint is completely mixed.
Do not thin. However, in hot environments and for sealing bare surfaces, thin the paint by 10% with clean water.
Apply 2 coats of Dulux Ecosense Matt using a suitable brush or roller.
Allow 4 hours between coats.
Where a strong colour change is involved, more coats may be required.
If using more than 1 can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
Store paint in dry conditions and protect from frost.
Health and safety
Water-based paint. Ensure good ventilation during application and drying. Avoid contact with skin and eyes. When applying it is advisable to wear eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use solvent, thinners or white spirit. Keep out of the reach of children. Do not use or store by hanging on a hook. Do not empty into drains or watercourses. Left over product may be taken to a Community RePaint collection point (www.communityrepaint.org.uk). Some local authorities have facilities for disposal of waste paint. Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. For further advice contact the Customer Advice Centre at ICI Paints AkzoNobel, Wexham Road, Slough, SL2 5DS. Tel: 08444 817 817
EU limit value for this product (Cat A/a): 75g/l (2007) / 30g/l (2010)
This product contains max. 1g/l VOC
